Borrow it
Coverart for item
The Resource Mechanics of Composite and Multi-functional Materials, Volume 6 : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, edited by Piyush R Thakre, Raman Singh, Geoff Slipher, (electronic resource)

Mechanics of Composite and Multi-functional Materials, Volume 6 : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, edited by Piyush R Thakre, Raman Singh, Geoff Slipher, (electronic resource)

Editor
Contributor
Summary
Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 6 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Nano & Particulate Composites Recycled Constituent Composites Hybrid Composites Multifunctional Materials Fracture & Fatigue of Composites Novel Developments in Composites Mechanics of Composites
Language
eng
Work
Publication
Extent
VIII, 221 p. 233 illus., 201 illus. in color.
Contents
  • Chap1. Transitioning Powertrain Components from Metallic to Light-weighting Materials
  • Chap2. Through Development of Inherently Sensing Energetics for Real-time in Situ Strain and Damage Detection
  • Chap3. Scrap-Rubber Based Composites Reinforced with Boron and Alumina
  • Chap4. Characterization of Thermoplastic Matrix Composite Joints for the Development of a Computational Framework
  • Chap5. Experimental Study of Laser Cutting Process of Titanium Aluminium (Ti-Al) based Composites designed through combined Method of Powder Metallurgy and Thixoforming
  • Chap6. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Nanoparticles
  • Chap7. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Nanographene
  • Chap8. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Alumina Fibers
  • Chap9. Scaled Composite I-beams for Subcomponent Testing of Wind Turbine Blades: An Experimental Study
  • Chap10. Development Analysis of a Stainless Steel Produced by High Energy Milling Using Chips and the Addition of Vanadium Carbide
  • Chap11. Design of Magnetic Aluminium (A356) Composites through Combined Method of Sinter + Forging
  • Chap12. Design of Low Composites from Recycled Aluminium-Copper +Aluminium Chips for Tribological Applications
  • Chap13. Liquid Metal Dispersions for Stretchable Electronics
  • Chap14. Laser Cutting of the TiN +Al2O3 Reinforced Aluminium Matrix Composites Through Semisolid Sintering. Chap15. Optimization of Laser Cutting Parameters for Tailored Behaviour of Scrap (Ti6242+Ti) based Composites through Semisolid Sintering
  • Chap16. Studying Effect of CO2 Laser Cutting Parameters of Titanium Alloy on Heat Affected Zone and Kerf width using the Taguchi Method
  • Chap17. Fatigue Characterization of In-Situ Self-Healing Dental Composites
  • Chap18. Effect of Process Induced Stresses on Measurement of FRP Strain Energy Release Rates
  • Chap19. Characterization of UV Degraded Carbon Fiber-matrix Interphase using AFM Indentation
  • Chap20. A Study on Mechanical Properties of Treated Sisal Polyester Composites
  • Chap21. Strain-rate-dependent Failure Criteria for Composite Laminates: Application of the Northwestern Failure Theory to Multiple Material Systems
  • Chap22. Progressive Failure Analysis of Multi-directional Composite Laminates Based on the Strain-Rate-Dependent Northwestern Failure Theory
  • Chap23. Keynote: Experimental Mechanics for Multifunctional Composites and Next Generation UAVs (40-min)
Isbn
9783319634081
Instance
Label
Mechanics of Composite and Multi-functional Materials, Volume 6 : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics
Title
Mechanics of Composite and Multi-functional Materials, Volume 6
Title remainder
Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics
Statement of responsibility
edited by Piyush R Thakre, Raman Singh, Geoff Slipher
Contributor
Editor
Provider
Subject
Language
eng
Summary
Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 6 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Nano & Particulate Composites Recycled Constituent Composites Hybrid Composites Multifunctional Materials Fracture & Fatigue of Composites Novel Developments in Composites Mechanics of Composites
Member of
Image bit depth
0
LC call number
  • TA405-409.3
  • QA808.2
Literary form
non fiction
http://library.link/vocab/relatedWorkOrContributorName
  • Thakre, Piyush R.
  • Singh, Raman.
  • Slipher, Geoff.
  • SpringerLink
Series statement
Conference Proceedings of the Society for Experimental Mechanics Series,
http://library.link/vocab/subjectName
  • Engineering
  • Continuum mechanics
  • Materials science
  • Ceramics
  • Glass
  • Composite materials
  • Composite materials
  • Engineering
  • Continuum Mechanics and Mechanics of Materials
  • Ceramics, Glass, Composites, Natural Materials
  • Characterization and Evaluation of Materials
Label
Mechanics of Composite and Multi-functional Materials, Volume 6 : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, edited by Piyush R Thakre, Raman Singh, Geoff Slipher, (electronic resource)
Instantiates
Publication
Antecedent source
mixed
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
not applicable
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
Chap1. Transitioning Powertrain Components from Metallic to Light-weighting Materials -- Chap2. Through Development of Inherently Sensing Energetics for Real-time in Situ Strain and Damage Detection -- Chap3. Scrap-Rubber Based Composites Reinforced with Boron and Alumina -- Chap4. Characterization of Thermoplastic Matrix Composite Joints for the Development of a Computational Framework -- Chap5. Experimental Study of Laser Cutting Process of Titanium Aluminium (Ti-Al) based Composites designed through combined Method of Powder Metallurgy and Thixoforming -- Chap6. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Nanoparticles -- Chap7. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Nanographene -- Chap8. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Alumina Fibers -- Chap9. Scaled Composite I-beams for Subcomponent Testing of Wind Turbine Blades: An Experimental Study -- Chap10. Development Analysis of a Stainless Steel Produced by High Energy Milling Using Chips and the Addition of Vanadium Carbide -- Chap11. Design of Magnetic Aluminium (A356) Composites through Combined Method of Sinter + Forging -- Chap12. Design of Low Composites from Recycled Aluminium-Copper +Aluminium Chips for Tribological Applications -- Chap13. Liquid Metal Dispersions for Stretchable Electronics -- Chap14. Laser Cutting of the TiN +Al2O3 Reinforced Aluminium Matrix Composites Through Semisolid Sintering. Chap15. Optimization of Laser Cutting Parameters for Tailored Behaviour of Scrap (Ti6242+Ti) based Composites through Semisolid Sintering -- Chap16. Studying Effect of CO2 Laser Cutting Parameters of Titanium Alloy on Heat Affected Zone and Kerf width using the Taguchi Method -- Chap17. Fatigue Characterization of In-Situ Self-Healing Dental Composites -- Chap18. Effect of Process Induced Stresses on Measurement of FRP Strain Energy Release Rates -- Chap19. Characterization of UV Degraded Carbon Fiber-matrix Interphase using AFM Indentation -- Chap20. A Study on Mechanical Properties of Treated Sisal Polyester Composites -- Chap21. Strain-rate-dependent Failure Criteria for Composite Laminates: Application of the Northwestern Failure Theory to Multiple Material Systems -- Chap22. Progressive Failure Analysis of Multi-directional Composite Laminates Based on the Strain-Rate-Dependent Northwestern Failure Theory -- Chap23. Keynote: Experimental Mechanics for Multifunctional Composites and Next Generation UAVs (40-min)
Dimensions
unknown
Extent
VIII, 221 p. 233 illus., 201 illus. in color.
File format
multiple file formats
Form of item
electronic
Isbn
9783319634081
Level of compression
uncompressed
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other control number
10.1007/978-3-319-63408-1
Other physical details
online resource.
Quality assurance targets
absent
Reformatting quality
access
Specific material designation
remote
System control number
(DE-He213)978-3-319-63408-1
Label
Mechanics of Composite and Multi-functional Materials, Volume 6 : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, edited by Piyush R Thakre, Raman Singh, Geoff Slipher, (electronic resource)
Publication
Antecedent source
mixed
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
not applicable
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
Chap1. Transitioning Powertrain Components from Metallic to Light-weighting Materials -- Chap2. Through Development of Inherently Sensing Energetics for Real-time in Situ Strain and Damage Detection -- Chap3. Scrap-Rubber Based Composites Reinforced with Boron and Alumina -- Chap4. Characterization of Thermoplastic Matrix Composite Joints for the Development of a Computational Framework -- Chap5. Experimental Study of Laser Cutting Process of Titanium Aluminium (Ti-Al) based Composites designed through combined Method of Powder Metallurgy and Thixoforming -- Chap6. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Nanoparticles -- Chap7. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Nanographene -- Chap8. Mechanical Characterization of Epoxy - Scrap Rubber Based Composites Reinforced with Alumina Fibers -- Chap9. Scaled Composite I-beams for Subcomponent Testing of Wind Turbine Blades: An Experimental Study -- Chap10. Development Analysis of a Stainless Steel Produced by High Energy Milling Using Chips and the Addition of Vanadium Carbide -- Chap11. Design of Magnetic Aluminium (A356) Composites through Combined Method of Sinter + Forging -- Chap12. Design of Low Composites from Recycled Aluminium-Copper +Aluminium Chips for Tribological Applications -- Chap13. Liquid Metal Dispersions for Stretchable Electronics -- Chap14. Laser Cutting of the TiN +Al2O3 Reinforced Aluminium Matrix Composites Through Semisolid Sintering. Chap15. Optimization of Laser Cutting Parameters for Tailored Behaviour of Scrap (Ti6242+Ti) based Composites through Semisolid Sintering -- Chap16. Studying Effect of CO2 Laser Cutting Parameters of Titanium Alloy on Heat Affected Zone and Kerf width using the Taguchi Method -- Chap17. Fatigue Characterization of In-Situ Self-Healing Dental Composites -- Chap18. Effect of Process Induced Stresses on Measurement of FRP Strain Energy Release Rates -- Chap19. Characterization of UV Degraded Carbon Fiber-matrix Interphase using AFM Indentation -- Chap20. A Study on Mechanical Properties of Treated Sisal Polyester Composites -- Chap21. Strain-rate-dependent Failure Criteria for Composite Laminates: Application of the Northwestern Failure Theory to Multiple Material Systems -- Chap22. Progressive Failure Analysis of Multi-directional Composite Laminates Based on the Strain-Rate-Dependent Northwestern Failure Theory -- Chap23. Keynote: Experimental Mechanics for Multifunctional Composites and Next Generation UAVs (40-min)
Dimensions
unknown
Extent
VIII, 221 p. 233 illus., 201 illus. in color.
File format
multiple file formats
Form of item
electronic
Isbn
9783319634081
Level of compression
uncompressed
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other control number
10.1007/978-3-319-63408-1
Other physical details
online resource.
Quality assurance targets
absent
Reformatting quality
access
Specific material designation
remote
System control number
(DE-He213)978-3-319-63408-1

Subject

Member of

Library Locations

  • African Studies LibraryBorrow it
    771 Commonwealth Avenue, 6th Floor, Boston, MA, 02215, US
    42.350723 -71.108227
  • Alumni Medical LibraryBorrow it
    72 East Concord Street, Boston, MA, 02118, US
    42.336388 -71.072393
  • Astronomy LibraryBorrow it
    725 Commonwealth Avenue, 6th Floor, Boston, MA, 02445, US
    42.350259 -71.105717
  • Fineman and Pappas Law LibrariesBorrow it
    765 Commonwealth Avenue, Boston, MA, 02215, US
    42.350979 -71.107023
  • Frederick S. Pardee Management LibraryBorrow it
    595 Commonwealth Avenue, Boston, MA, 02215, US
    42.349626 -71.099547
  • Howard Gotlieb Archival Research CenterBorrow it
    771 Commonwealth Avenue, 5th Floor, Boston, MA, 02215, US
    42.350723 -71.108227
  • Mugar Memorial LibraryBorrow it
    771 Commonwealth Avenue, Boston, MA, 02215, US
    42.350723 -71.108227
  • Music LibraryBorrow it
    771 Commonwealth Avenue, 2nd Floor, Boston, MA, 02215, US
    42.350723 -71.108227
  • Pikering Educational Resources LibraryBorrow it
    2 Silber Way, Boston, MA, 02215, US
    42.349804 -71.101425
  • School of Theology LibraryBorrow it
    745 Commonwealth Avenue, 2nd Floor, Boston, MA, 02215, US
    42.350494 -71.107235
  • Science & Engineering LibraryBorrow it
    38 Cummington Mall, Boston, MA, 02215, US
    42.348472 -71.102257
  • Stone Science LibraryBorrow it
    675 Commonwealth Avenue, Boston, MA, 02445, US
    42.350103 -71.103784

Library Links

Zepheira Logo
Structured data from the Bibframe namespace is licensed under the Creative Commons Attribution 4.0 International License by Boston University Libraries. Additional terms may apply to data associated with third party namespaces.
Processing Feedback ...